resistor value

alright guys, I have never been particularly good with resistors and calculating values so I am just lookin for some help For my passlock bypass i need 936 ohms resistance value. What I need to know is what resistor(s) to use because I have not seen a 936 ohm resistor outright Also, what level of tolerance is there in the pass lock system, for example I do not want to be using 5% resistors, which would equal a potential fluctuation of 46.8 ohms. I would ideally want to us 1% resistors but they ca be kind of difficult to find, and its tough ordering them online, .90 cents in resistors,11 dollars shipping. any input would be helpful

you can use a Trim Pot and adjust accordingly. I suggest you fork out the 25 dolalrs to purchase a databypass. When using resistors, in the cold, the resistance changes and could cause the system to lockout. WHen using data bypass, you dont have to worry about resistance change as the bypass will do just that.

the problem was I have a 556lw in there now that is giving me problems. Is there another bypass company that comes highly recommended?

What kind of car is this first off?C Renner's Auto Electronix

My service is cheap, quick, and good - pick any two