Fiberglass Clean-up

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Fiberglass Clean-up (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

sammy004

Member - Posts: 19

Joined: June 09, 2002

Location: Canada

Posted: March 09, 2003 at 12:59 PM / IP Logged

Can anyonr tell me whats the best way to clean up that sticky fiberglass resin from your hands and your brush? Is there andthing that I can use to so I don't have to throw my brush out everytime a do a fiberglass project.

www.bassandstyle.com

Back to Top

cavyinthegarage

Copper - Posts: 52

Joined: November 30, 2002

Location: United States

Posted: March 09, 2003 at 4:01 PM / IP Logged

I use laquer thinner for my hands... I always throw out the brushes.. to much of a pita to try to keep from drying out... I buy 36 chip brushes from harborfreght.com for 13 bucks... 2" brushes... since they are so cheap its just economical to trash them..

Back to Top

cavyinthegarage

Copper - Posts: 52

Joined: November 30, 2002

Location: United States

Posted: March 09, 2003 at 4:04 PM / IP Logged

testing

Back to Top

sammy004

Member - Posts: 19

Joined: June 09, 2002

Location: Canada

Posted: March 09, 2003 at 4:05 PM / IP Logged

So just reg. paint thiner will work good.

Back to Top

cavyinthegarage

Copper - Posts: 52

Joined: November 30, 2002

Location: United States

Posted: March 09, 2003 at 4:07 PM / IP Logged

I dont think so... I believe it only says laquer thinner on the back of the resin can... I havent tried any thing else...

Back to Top

audiomechanic

Silver - Posts: 388

Joined: November 09, 2002

Location: United States

Posted: March 11, 2003 at 5:51 AM / IP Logged

acetone will work to clean the brushes also, laquer thinner you can also use it to clean off your filler spreaders to save them and keep them like new.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Fiberglass Clean-up

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.