kenwood kvt 717dvd

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / kenwood kvt 717dvd (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

cb7green

Member - Posts: 6

Joined: June 06, 2008

Location: Iowa, United States

Posted: August 15, 2008 at 11:41 PM / IP Logged

I'm gettin ready to install my Kenwood KVT 717 and i need to know what the blue, blue/white, and pink/black wire are used for on the receiver unit. i wil have an amp for my subs. by the way this is goin in a 92 accord. http://akamaipix.crutchfield.com/Manuals/113/113717DVD.PDF page 96 thanks guy

Back to Top

terohc

Member - Posts: 11

Joined: June 21, 2008

Location: California, United States

Posted: August 19, 2008 at 2:03 PM / IP Logged

The Blue wire is for a powered antenna, the blue with white stripe goes to your remote turn on connection on your amp. The pink/blk is only for specific older Kenwood Amps.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

kenwood kvt 717dvd

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.