giordon remote starter

Home / the12volt's Install Bay / Car Security and Convenience / giordon remote starter (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Giovan101

Member - Posts: 5

Joined: October 29, 2003

Posted: August 18, 2008 at 12:06 PM / IP Logged

Hi,

I got this Giordon alarm/remote starter from a friend. I am confused with the 4 pin relay block for the remote start. The wires go as follows:

RED- Power wire

BLUE- I think it's the Start Wire

BROWN- Ignition 1 wire?

GREEN- Accessory wire

YELLOW- I have no idea

RED / BLACK- No idea

Can you please help me with the purpose of these wires?

Even if you know what just 1 or 2 of these wires do it will still help.

Thanks!!

giordon remote starter -- posted image.

Giovan101

Member - Posts: 5

Joined: October 29, 2003

Posted: August 18, 2008 at 7:09 PM / IP Logged

Nobody can figure it out?

Again I am assuming that the blue is the start wire, brown is ignition, green is accessory. If it's not please let me know.

The ones I am really confused are the last 2 on the 4th relay, yellow and RED / black.

Any ideas?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

giordon remote starter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.