the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2005 tacoma with jbl system


Post ReplyPost New Topic
< Prev Topic Next Topic >
soundimpression 
Member - Posts: 4
Member spacespace
Joined: September 03, 2008
Location: Colorado, United States
Posted: September 03, 2008 at 1:30 PM / IP Logged  
Anyone know the impedance of the factory speakers? Trying to decide if an integration harness or wiring to the factory speakers is going to cost less. I need to bid this job right away.
Al
Sound Impressions, Inc.
Colorado Springs
megaman 
Copper - Posts: 385
Copper spacespace
Joined: June 24, 2008
Location: Montana, United States
Posted: September 03, 2008 at 2:48 PM / IP Logged  
3 ohm.  If the factory amplifier is directly behind the AC controls, you can bypass the amp and go direct with the standard harness.
soundimpression 
Member - Posts: 4
Member spacespace
Joined: September 03, 2008
Location: Colorado, United States
Posted: September 03, 2008 at 9:10 PM / IP Logged  
Thanks much for the info. that makes life easier.
Al
Sound Impressions, Inc.
Colorado Springs
spookiestylez 
Silver - Posts: 531
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: September 23, 2005
Location: Virginia, United States
Posted: September 03, 2008 at 10:06 PM / IP Logged  
you'll see the bolt for the factory amp right under the radio after its removed. After you take it out you can use the 70-1784 plug like normal.
rtfm
soundimpression 
Member - Posts: 4
Member spacespace
Joined: September 03, 2008
Location: Colorado, United States
Posted: September 03, 2008 at 11:30 PM / IP Logged  
Which manufacturer is that part number for? I can't find that pn in metra or scosche, or ai or from aamp.
Al
Sound Impressions, Inc.
Colorado Springs
snotdobbs 
Copper - Posts: 148
Copper spacespace
Joined: September 11, 2003
Location: United States
Posted: September 04, 2008 at 11:46 AM / IP Logged  
i think he meant 70-1761 its a metra part number, 70-1784 is a vw harness , best kits(aamp) is bha-1761.  But metra lists an amplifier bypass harness, and in the instructions for that truck it says that the amp is in the back of the truck on the rear wall, passenger side. The metra amp bypass part number is 70-8117

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, January 30, 2023 • Copyright © 1999-2023 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer