remote start 2007 fj cruiser

HI all I installed a ungo rs 10 remote start in our cruiser...i got it working with the door locks and was able to make it release the rear glass from the remote and start the vehicle. my problem is the air bag light stays on and the lights blink even with the key in the ignition until i disarm the remote start with the fob. do i need the key sense hooked up? also my A/C doesnt come on with the remote start until I turn the key on. i did hook up both start wires.....seems like i missed some wires. i couldn't find a wire that tells the remote start the car is in park so I just grounded that wire for this....would this cause any problems? sorry to have so many questions.

Yo don't have the second ignition wire connected. It's blue / YELLOW in the harness. If your RS doesn't have a second ignition output you will need a relay...Mike M2

Tech Manager

CS Dealer Services