idatalink ads al ca door status output

Home / the12volt's Install Bay / Car Security and Convenience / idatalink ads al ca door status output (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Komobu

Copper - Posts: 70

Joined: February 25, 2005

Location: United States

Posted: October 31, 2008 at 3:50 PM / IP Logged

Hi;

I am installing a remote start on a 2004 Jeep. I am using the idatalink bypass. Hooking the wires from the remote start to the idatalink module is relatively easy. I have a question about hooking the idatalink module to the car though.

It tells me to hook a pink wire to 12v ignition

One wire to ODBII Data Port Pin 2

It then says that a yellow/black wire is for door status neg output. What does this mean? does this hook back up to the alarm portion of the remote start?

Thanks for any help

Back to Top

revolutionz_s13

Member - Posts: 19

Joined: November 18, 2007

Posted: October 31, 2008 at 6:07 PM / IP Logged

If you're not doing an alarm you wont need to worry about this wire. This will just give you the door status output to connect to the alarm system. Not sure why you would hook up a door trigger on this vehicle for a remote start.

Back to Top

Search for other posts by revolutionz_s13

dcorwin822

Member - Posts: 34

Joined: November 09, 2008

Location: New York, United States

Posted: January 08, 2009 at 6:08 PM / IP Logged

manual transmission?

Back to Top

loneranger

Copper - Posts: 572

Joined: December 28, 2008

Posted: January 08, 2009 at 6:40 PM / IP Logged

domelight supervision?

Back to Top

loneranger

Copper - Posts: 572

Joined: December 28, 2008

Posted: January 08, 2009 at 6:41 PM / IP Logged

passive locking?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

idatalink ads al ca door status output

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.