08 chevrolet uplander, data bcm

Have a 2008 chevrolet uplander to do shortly, and will be using the INT-SL bypass module. One of the connections is to the DATA BCM wire on the vehicle. I cannot seem to find the color or location of this wire in any of my info. I am assuming the wire is obviously at the bcm, but does anyone have any further info on this wire.

Any help would be greatly appreciated

read the manual and look at the wiring pictures

its all there in black and white

Maxcat,

2008 uplander data                          tan/white @ BCM conn. C1 pin 37

however like rob said lok at your directions twice three times what ever it takes but it is almost always there.  Read, read, read!  in Gm's it is almost always pin1 or 2  at test plug , flip plug backwords and numbers are on it depending on plane of vehicle it is almost always 1 or 2

Hey Guys Thanks for the replies,  However correct me if I am wrong, but the instructions I have and even the latest instuctions on the IFAR site only give you that color and position for the 05 and 06. My goal (as I tend to read very well) is to ask someone that can verify that this might be the same for the 08. I do not like to assume, and if I can get some help from someone that knows i will always try. I appologize if the 08 data is there but I only see up to 06.

Thanks again for the replies

i see what you mean

if in doubt phone them

thats what i would do