remote start, 2000 ram, viper 550 esp

Home / the12volt's Install Bay / Car Security and Convenience / remote start, 2000 ram, viper 550 esp (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

jmw505

Member - Posts: 46

Joined: August 21, 2008

Location: Ohio, United States

Posted: November 07, 2008 at 3:05 PM / IP Logged

problem is it is a data cable 5 wires have to be triggered at diffrent times and i don't want to mess any thing up by doing it but after looking at the system i think the problem between the remote and and the out put to the relays

ckeeler

Gold - Posts: 1,461

Joined: June 20, 2008

Location: New Mexico, United States

Posted: November 07, 2008 at 3:10 PM / IP Logged

jmw505 wrote:

huh?......those arent data remote start, 2000 ram, viper 550 esp - Page 2 - Last Post -- posted image. . those are just low voltage grounds that trigger the relays. im not talking about thoses anyway. im talking about the wire that activates the remote start with an external source, find that wire.

jmw505

Member - Posts: 46

Joined: August 21, 2008

Location: Ohio, United States

Posted: November 07, 2008 at 3:14 PM / IP Logged

i don't get what your talking about the remote start is activited by the remote

ckeeler

Gold - Posts: 1,461

Joined: June 20, 2008

Location: New Mexico, United States

Posted: November 07, 2008 at 3:31 PM / IP Logged

the 550esp can also be triggered by an external source like another keyless unit or anything that has a neg output. find that wire and ground it.

jmw505

Member - Posts: 46

Joined: August 21, 2008

Location: Ohio, United States

Posted: November 08, 2008 at 10:11 AM / IP Logged

sry i had to leave but found the wire and grounded it and nuttin it is a negitive input there is nuttin going on with it

ckeeler

Gold - Posts: 1,461

Joined: June 20, 2008

Location: New Mexico, United States

Posted: November 08, 2008 at 10:18 AM / IP Logged

ok, i had you find that wire and ground it because if you did and then the remote start started, that would mean there is nothing wrong with it, but probably the transmitter. but since it didnt start.......the problem is the remote start.

jmw505

Member - Posts: 46

Joined: August 21, 2008

Location: Ohio, United States

Posted: November 08, 2008 at 11:38 AM / IP Logged

yea thats what i am thinking i am ordering a new one monday

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote start, 2000 ram, viper 550 esp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.