1999 4runner factory alarm

Home / the12volt's Install Bay / Car Security and Convenience / 1999 4runner factory alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

welderjon63

Member - Posts: 7

Joined: October 23, 2008

Location: Vermont, United States

Posted: November 14, 2008 at 8:11 PM / IP Logged

The Autopage remote starter remote controls

Jon

i am an idiot

Platinum - Posts: 13,716

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: November 14, 2008 at 8:35 PM / IP Logged

Is this the wiring info you used?

	Power Unlock		BLUE / YELLOW & GREEN/ YELLOW		(-)		AND RED / BLU USE BOTH WIRE DIO. ISOLATE
	PowerLock		BROWN / WHITE		(-)		IN DRIVERS KICK PANEL (2 PULSE UNLOCK)

welderjon63

Member - Posts: 7

Joined: October 23, 2008

Location: Vermont, United States

Posted: November 15, 2008 at 2:24 AM / IP Logged

I'll take the kick panel off this weekend and check. Can you give me a little more detail on the wiring. I didn't use any diodes. If your an idiot, I'm dumb as a stump. Appreciate all the help. Jon

Jon

welderjon63

Member - Posts: 7

Joined: October 23, 2008

Location: Vermont, United States

Posted: November 15, 2008 at 2:37 AM / IP Logged

I didn't take the panel off yet (its 3:30am), but I looked at the wire diagram I used on this site, and it looks like I used- Lock - RED / Whte (-)

Unlock- Red (-)

There is a note at the bottom with the BROWN / White and the GREEN/ Yellow but I don't see the Blue/ Yellow on the page...

Thanks again!

Jon

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1999 4runner factory alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.