the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

avital 4000xl on 97 corolla


Post ReplyPost New Topic
< Prev Topic Next Topic >
97corolla 
Member - Posts: 9
Member spacespace
Joined: November 18, 2008
Location: Wisconsin, United States
Posted: November 18, 2008 at 6:52 PM / IP Logged  
I bought it without the install bc I thought it's only 5 or 6 wires I need to hook up avital 4000xl on 97 corolla - Page 2 -- posted image. There's more wires than I can imagine so I stumble on my installation. Anyways, without the installation, I paid 49.99 for it.
97 Corolla
97corolla 
Member - Posts: 9
Member spacespace
Joined: November 18, 2008
Location: Wisconsin, United States
Posted: November 19, 2008 at 3:22 PM / IP Logged  
Can someone tell me where I need to hook the 200mA third ignition turn ON, 200mA second starter turn ON, 200mA accessory turn ON and 200mA status output to??? Thanks
97 Corolla
ckeeler 
Gold - Posts: 1,461
Gold spacespace
Joined: June 20, 2008
Location: New Mexico, United States
Posted: November 19, 2008 at 3:29 PM / IP Logged  
You wont need any of those wires to make your vehicle start. you only have 2 ignitions, 1 start, and 1 accessory. the wires you ask about simply wont be used for your install.
97corolla 
Member - Posts: 9
Member spacespace
Joined: November 18, 2008
Location: Wisconsin, United States
Posted: November 19, 2008 at 4:21 PM / IP Logged  
Ok, here is my progress...
I finished connecting the heavy gauge relay wiring:
Pink---(+) (30 AMP) Output to Ignition Circuit (Primary)
Purple-(+) (30 AMP) Output to Starter Circuit
Orange-(+) (30 AMP) Output to Accessory Circuit
Red----(+) (30A) High Current 12v Input
Pink/White (+) Programmable Output for Ignition Circuit (Secondary)
Red----(+) (30A) High Current 12v Input
I wasn't sure where the pink/white wire go so I connect that to the secondary Ignition wire. Is that right?
I have the following left to connect....
Remote Start Harness (H2)
BLACK/ White----- (-) Neutral Safety switch input
Violet/White---- Tachometer Input wire
Brown----------- (+) Brake switch Shutdown wire
Gray------------ (-) Hood pinswitch Shutdown wire
Blue/White------ (-) 200mA 2nd status/rear defogger output
4 Pin satellite harness
Blue------------ Status Output
Orange---------- Accessory Trigger
Purple---------- Starter Trigger
Pink------------ Ignition Trigger
Primary Harness (H1)
Light GREEN/ black------Factory Alarm Disarm
GREEN / WHITE------------Factory Rearm
Yellow-----------------(+) Ignition out (to alarm)
WHITE/ blue-------------(-) Activation input
Gray/black-------------(-) Wait to Start input
WHITE/ Red--------------(+) Activation Input
RED / White-------------- Channel 2(Validity Only)
Black------------------Ground
White------------------(+/-) Light Flash
For the Primary Harness, I don't think I'll need to use the first three wires since the 97 Corolla don't have an alarm from factory and also I don't think I'll need the wait to start input wire since it's a fuel injected. Not diesel. What about the RED / White Channel 2 wire?
I just want to thanks for those that are trying to help the brotha here out. Thanks a bunch guys.
97 Corolla
ckeeler 
Gold - Posts: 1,461
Gold spacespace
Joined: June 20, 2008
Location: New Mexico, United States
Posted: November 19, 2008 at 4:29 PM / IP Logged  

finish by connecting the ones below.

97corolla wrote:
Remote Start Harness (H2)
BLACK/ White----- (-) Neutral Safety switch input
Violet/White---- Tachometer Input wire
Brown----------- (+) Brake switch Shutdown wire
Gray------------ (-) Hood pinswitch Shutdown wire
Blue/White------ (-) 200mA 2nd status/rear defogger output--------OPTIONAL
Primary Harness (H1)
Black------------------Ground
White------------------(+/-) Light Flash

DOOR LOCK WIRES IF YOU WANT KEYLESS ENTRY, THEY ARE ALSO OPTIONAL

97corolla 
Member - Posts: 9
Member spacespace
Joined: November 18, 2008
Location: Wisconsin, United States
Posted: November 19, 2008 at 5:33 PM / IP Logged  
I finally got the remote starter to work!!!!!!! Thank you very much Ckeeler for the help! Wish you're close by so I can get you some Beer!
97 Corolla
ckeeler 
Gold - Posts: 1,461
Gold spacespace
Joined: June 20, 2008
Location: New Mexico, United States
Posted: November 19, 2008 at 5:47 PM / IP Logged  

97corolla wrote:
I finally got the remote starter to work!!!!!!! Thank you very much Ckeeler for the help! Wish you're close by so I can get you some Beer!

SON OF A BISCUIT! that would be very nice. thanks for the thought anyway. and your welcome

another-kelly 
Silver - Posts: 618
Silver spacespace
Joined: July 11, 2004
Location: United States
Posted: November 19, 2008 at 6:30 PM / IP Logged  
Remote Start Harness (H2)
BLACK/ White----- (-) Neutral Safety switch input--------------ground it
Primary Harness (H1)
Light GREEN/ black------Factory Alarm Disarm--------- not used
GREEN / WHITE------------Factory Rearm---------------- not used
Yellow-----------------(+) Ignition out (to alarm)-- not used
WHITE/ blue-------------(-) Activation input--------- not used
Gray/black-------------(-) Wait to Start input------ not used
WHITE/ Red--------------(+) Activation Input--------- not used
RED / White-------------- Channel 2(Validity Only)---- trunk release
Black------------------Ground----------------------- ground
White------------------(+/-) Light Flash------------ parking lights
if your toyota has the lever you pull to pop the trunk, then nevermind the channel 2. if you can open the trunk with a switch then it's doable.
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, June 23, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer