remote start headlights stay on

I installed a Viper 5701 remote start in my 2007 Tundra. Everything works fine except when I remote start the truck then remote stop it without getting in (opening the door), if it is dark outside the headlights do not turn off. I have automatic headlights on the truck and this only happens when the headlight switch is on Auto, any other position and the headlights turn off when I remote stop. Any ideas?

Thanks,

Thanks for the replies. I have a couple of questions:

• Is the 'ground when running' the same as the 'Remote Start Output Status'?  I assume it is...
• If I use a relay connected to the 'ground when running' output to interrupt the headlights power at the switch, will I be able to use my headlights if I remote start and attempt to drive the vehicle?

Thanks for the help...

ground when running=status output

yes you will. once the remote start is deactivated by stepping on the brake though of course.

Thanks!

I installed the relay but made a minor change. I interrupted the Auto input from the headlight switch instead of the power feed, now the vehicle thinks the headlight switch is off when remote starting.

Thanks for the help!