need help with zapco z50c2 amp

Home / the12volt's Install Bay / Car Audio / need help with zapco z50c2 amp (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

equalizir

Copper - Posts: 71

Joined: February 28, 2003

Location: United States

Posted: March 15, 2003 at 10:10 PM / IP Logged

now you got me confused again?

dragonrage

Copper - Posts: 193

Joined: March 15, 2003

Location: United States

Posted: March 15, 2003 at 10:12 PM / IP Logged

Don't listen to what I said. It wasn't meant to be an explanation for someone without an electronics background. If you want a better explanation, let me know what about.

2009 Pontiac G8 in planning stage

HU: ?

Speakers: ?

Amps: ?

bberman1

Gold - Posts: 2,314

Joined: March 11, 2002

Location: United States

Posted: March 15, 2003 at 10:17 PM / IP Logged

Don’t get confused you want to run 1 D4 and wire it the way I suggested earlier. dragonrage is talking about (2) 4 ohm dvc subs which will give you either 1 or 4 ohms.

dragonrage

Copper - Posts: 193

Joined: March 15, 2003

Location: United States

Posted: March 15, 2003 at 10:19 PM / IP Logged

Yes, that's what I thought you meant by using the number 2 and DVR

2009 Pontiac G8 in planning stage

HU: ?

Speakers: ?

Amps: ?

equalizir

Copper - Posts: 71

Joined: February 28, 2003

Location: United States

Posted: March 16, 2003 at 10:59 AM / IP Logged

can anyone tell me what kinda power this amp should put out at 2 or 1 ohm?

bberman1

Gold - Posts: 2,314

Joined: March 11, 2002

Location: United States

Posted: March 16, 2003 at 12:15 PM / IP Logged

If you wire your sub in parallel which will be 2 ohms and then bridge your amp. Your amp will end up with a 1 ohm load. So your amp will be putting out the power of a 1 ohm load.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

need help with zapco z50c2 amp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.