2000 rav4 door triggers

Home / the12volt's Install Bay / Car Security and Convenience / 2000 rav4 door triggers (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

btj01

Member - Posts: 5

Joined: December 27, 2008

Location: Maryland, United States

Posted: December 28, 2008 at 8:16 PM / IP Logged

Hi,

I installed a Viper 560xv in a 200 Toyota Rav4 today, I used the red wire that runs under the drivers seat for the door triggers. Checked it before hand and it seen all doors. Finished and now it doesn't see any. The dash door indicator light and the dome light only recognizes the passengers front door, no others. Any help or a point in the right direction would be greatly appreciated.

btj01

Member - Posts: 5

Joined: December 27, 2008

Location: Maryland, United States

Posted: December 29, 2008 at 9:09 PM / IP Logged

Hi,

Found the problem earlier today, Stupid mistake. Found a connector in the kick panel that I didn't push back in all the way.Pushed it back in and problem solved. Just a dumb mistake on my part.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 rav4 door triggers

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.