3 memphis m312d4 subs

I contacted ememohis i got the box specs from them they are

3 subs wired @ 2.6 ohm

I also bouthgt a new amp the memphis mcd 1500.1 at 2 ohms, i'm going to try this set up or if any suggestions on this I would like that

my main concern is how to make this fit in the back if a 1990 cadillac sedan deville, the trunk is big but the sahpe is kind of odd.

Suggestions welcome

That amp should be a perfect match for them.

[IMG]https://i277.photobucket.com/albums/kk71/REEDeffect/3_12subbox.jpg[/IMG]

This is how  i did 3 12s in a civic sedan years back. Maybe it will spark an idea. I did the back (non sub side) to fit the seat opening. Then on the sub side made it bigger to allow more airspace and the space required to fit the 3 12s. For the angle sides i reinforced the angles with some fiberglass to help the week point. (because of the angle i used i could not get it shot together)