prostart ct 3200 start failure

HI EVERYBODY I just joined this great forum. I bought a car 1999 daewoo and remote starter worked fine as my friend tried it.After few days later when I did try to start the car for the first time it just failed but I could hear relay is activating but not any light flashing.The lock unlock feature works fine but as I mentioned no start at all and no engagement of starter relay.I think I messed it up as playing with ignition switch and remote transmitter. Please let me know what to do since this is my first time considering never had a car with remote starter before. Highly appreciated   mike31

Straight out of the user guide To put the system into Valet Mode • To put the system i n t o Valet mode using the KEY (Ignition Valet Mode): a. Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times successively into the IGNITION/RUN and OFF positions. The parking lights will flash three times. b. Turn the ignition OFF. The LED on the antenna will come ON solid to indicate that the vehicle has successfully entered Valet mode. To put the system out of Valet Mode • To put the system o u t o f Valet mode using the KEY (Ignition Valet Mode): a. Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times successively into the IGNITION/RUN and OFF positions. The parking lights will flash twice. b. Turn the ignition OFF. c. The LED will be OFF. The system will warn you if someone attempts to remote start the vehicle while in Valet Mode: The parking lights will: Turn ON then OFF; then Flash twice.

Thanks guys for the reply I will try it later based on the posted instruction and I will let you know the results Thanks again. Mike

HI GENTS I did carry out the above mentioned procedure a few times and it WORKED. Thanks a lot. Mike