1st fiberglass project

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / 1st fiberglass project (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

whiteboi

Member - Posts: 6

Joined: July 19, 2007

Location: United States

Posted: January 16, 2009 at 12:47 AM / IP Logged

Ok, this is my 1st fiberglass project that i'll be doing completely by myself. The plan is to fabricate the dash to accomodate a Samsung 19" Flatscreeen computer monitor. Below is a picture of the dash & a picture of the screen itself. Any suggestions?? The dash board is gonna be wrapped after the install is finished, so, i dont think i need to make a mold. Any advicewould b great. Thanxx n advance

1st fiberglass project -- posted image.

If At 1st U don't Succeed, GOOGLE it and try again.

airhed692005

Copper - Posts: 72

Joined: January 04, 2009

Location: Michigan, United States

Posted: January 16, 2009 at 2:19 AM / IP Logged

Like it so far, how do you like that dual flip screen, i got the xdvd8183 screen in my van and i like it

Ronald Bailey Owner/ Installer of VIBRATION CUSTUM SOUNDS. CUSTOM BOX DESIGNER AND BUILDER

TID-896 7" screen,Amp-BX1206d

4/0power/ground cables

4-12 mofos 12ft3 box tuned 40hz DB:163.1

whiteboi

Member - Posts: 6

Joined: July 19, 2007

Location: United States

Posted: January 16, 2009 at 11:08 PM / IP Logged

Thats the 1 I have. I was in love with it, up until about 2 weeks ago. All the outputs on the radio suddenly went out. I checked all my connections multiple times, but, it juss seems like the internal amp went out. My car does get very dusty & my radio is mounted @ the top of the dash, so, maybe heat & other stuff messed with. I dont know. Thats why i, gonna do the computer install now. 1st fiberglass project -- posted image.

If At 1st U don't Succeed, GOOGLE it and try again.

airhed692005

Copper - Posts: 72

Joined: January 04, 2009

Location: Michigan, United States

Posted: January 18, 2009 at 7:05 PM / IP Logged

yeah dual has been having problems with the xdvd line. have fun with that computer in the car. Not that easy of a project good luck

Ronald Bailey Owner/ Installer of VIBRATION CUSTUM SOUNDS. CUSTOM BOX DESIGNER AND BUILDER

TID-896 7" screen,Amp-BX1206d

4/0power/ground cables

4-12 mofos 12ft3 box tuned 40hz DB:163.1

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1st fiberglass project

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.