lost prostart remote

Home / the12volt's Install Bay / Car Security and Convenience / lost prostart remote (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

soaresri

Member - Posts: 3

Joined: January 16, 2009

Location: Ontario, Canada

Posted: January 16, 2009 at 2:14 PM / IP Logged

My girlfriend had a prostart starter installed in her 02 Corolla a little over a year ago. She recently lost the remote so I picked up a new CT-100 prostart (Looks exactly like the one she had before) It cam with instructions telling me to turn off valet switch and turn it on again. But as far as I know there is no switch. I'm not sure what model the starter is but like I said the remote matched the old one (black with 2 grey buttons) How do I program it properly?

Back to Top

saskpuller

Copper - Posts: 144

Joined: November 14, 2006

Location: Canada

Posted: January 16, 2009 at 10:11 PM / IP Logged

Flash the hood pin. (Push pin down and release. Push down again before parklights go out. The p/l should now stay on). Turn key to ignition and then off. Push and hold lock button on remote. Should be golden!

Back to Top

soaresri

Member - Posts: 3

Joined: January 16, 2009

Location: Ontario, Canada

Posted: January 17, 2009 at 7:31 PM / IP Logged

OK I tried the hood pin and the lights never came on... is it possible it could still work? I even tried holding it down several seconds. I tried with and without the key in the ignition and nothing happens... Is there something wrong with the pin now?

Back to Top

xghost

Member - Posts: 34

Joined: February 04, 2007

Location: Canada

Posted: January 17, 2009 at 10:05 PM / IP Logged

Thats an old one ct-100 was it? For proper programming you need to have a good hood pin connection. Just do what saskpuller said. Your park lights should flash once and then stay on. If you got nothing from the lights then check your hood pin for proper operation. Rust, corrosion, or an open may be your problem, or worst case a bad module......

Good luck.

Back to Top

soaresri

Member - Posts: 3

Joined: January 16, 2009

Location: Ontario, Canada

Posted: January 20, 2009 at 9:26 AM / IP Logged

yeah I guess I'm just going to take it to the guy who installed it.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

lost prostart remote

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.