the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper remote start, ’04 toyota celica


Post ReplyPost New Topic
< Prev Topic Next Topic >
bagadime 
Member - Posts: 6
Member spacespace
Joined: January 11, 2007
Location: United States
Posted: January 18, 2009 at 11:36 PM / IP Logged  
Thank You everyone who has helped me diagnose the problem.
I've got it fixed!
I checked the alarm's remote start shut down diagnostic thing (the thing that tells you what caused the RS to shut down) and it kept reporting the hood pin switch. I pulled the wire and pin from the RS shut down harness and the remote start fired right up!
Somewhere between the pin switch and the brain, the wire was compromised and was grounding out. (not in the engine compartment or near the grommet going through the firewall, believe it or not)
I ran a new wire in its place and everything is working fine now.
Thanks again!
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 9, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer