led scanners

Home / the12volt's Install Bay / Car Security and Convenience / led scanners (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rolex_p

Member - Posts: 3

Joined: March 18, 2003

Location: Philippines

Posted: March 18, 2003 at 8:16 PM / IP Logged

can anyone help me on how to make led scanners work with rf-502 (autopage brand)?

Anthony1

Copper - Posts: 62

Joined: February 18, 2003

Location: Canada

Posted: March 19, 2003 at 7:57 AM / IP Logged

Good Luck, I tryed for 3 weeks to get my CLA scanner to work of my alarm. It was supposed to be a 3 wire install. I gave up. Hopefully you will have better luck.

rolex_p

Member - Posts: 3

Joined: March 18, 2003

Location: Philippines

Posted: March 25, 2003 at 4:26 PM / IP Logged

luck has come finally! my problem was solved after 3 nights of burning my eyebrows. i used dmm to find the right wire, the one that is grounded when alarm is activated. i even placed a switch to isolate the scanner from my alarm. all works well now. thanks anyway...

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

led scanners

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.