2003 grand am remote start

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2003 grand am remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bryanh08

Member - Posts: 1

Joined: January 30, 2009

Location: Illinois, United States

Posted: January 30, 2009 at 1:01 PM / IP Logged

I hooked a ready remote up to a 2003 grand am. I installed the bypass for the passlock II. When I try to remote start the car everything will turn on but the car won't even try to start. Won't crank or anything. Do I need to hook up the wire from the tach to make it work? If so where would I find the wire. Thanks

james bond 007

Copper - Posts: 62

Joined: January 18, 2009

Location: Ontario, Canada

Posted: January 31, 2009 at 8:54 PM / IP Logged

the TACH wire is a WHITE wire at the PCM (Powertrian Control Module) in the engine compartment, on the 2.2L engine, in a BLACK Plug, Pin 19. On the 3.4L engine, it is a PURPLE / WHITE at the BLUE Plug, Pin 8, at the PC

Search for other posts by james bond 007

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2003 grand am remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.