remote starter 1998 crv

my friend game me the ultra G11 starter. i put all the wire in and remote transmitter learn. at first i try to go tachless, it doesn't work, i connect the wire and it still doesn't learn and gives me the 7 flash(tach lock-out) do i have to connect the wire to the fuel injection(don't know which wire is the one). what if i put it in the injection and it still doesn't work?

Tach can be found in a long blue plug on top of the fuse box under the dash. blue wire next to a WHITE/ black. bottom row.

thank you (KarTuneMan) i use to connect to the other blue wire, not the one next to the BLACK/ white, now i got it right but another problem came up, it remote start fine but when i lock and unlock the door it shut off the ignition and gave me a 6 flash code and i think it's the brake.  should i disconnect the brake wire?

"is it OK for me to take the brake wire out?" No, don't take the brake wire out. The brake wire is a safty wire require to shut down the remote starter.Be careful whose advice you buy, but be patient with those who supply it.

than how do i unlock the door without shutting the remote start ignition?

I'm confused. Is there something special about the G11 and doorlocks? I never used UltraStart products.Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.

Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?

Moral - Never dismiss the obvious.

Any one here heard of key sense lads? Hasn't this person had the same problem last week with another Honda?

Whatever you've done it looks like you made the same mistake as when you asked a very similar  question ref. the same vehicle. That post is lower down on this page . Come on Gary,  Darren and Lone Ranger at least one of you answered the previous post.  Bboyflashy, if you're in New York City, contact Enice to sort you out,  if upstate contact Chris Luongo, take your vehicle to either and pay them to sort it out.