99 expedition, python 1400xp

Home / the12volt's Install Bay / Car Security and Convenience / 99 expedition, python 1400xp (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ssailer

Member - Posts: 5

Joined: February 02, 2009

Posted: February 04, 2009 at 7:34 PM / IP Logged

can anyone tell me the order of wires in my PATS plug? There is no label. Thanks, Scott

robertsc

Copper - Posts: 337

Joined: December 21, 2007

Location: Ontario, Canada

Posted: February 04, 2009 at 8:36 PM / IP Logged

https://ifar.ca/en/download/838/key-override-sl2_installation_guide.rev-v.pdf

ssailer

Member - Posts: 5

Joined: February 02, 2009

Posted: February 11, 2009 at 10:16 PM / IP Logged

Trying to wrap up install on my Expedition. Installed a relay for dome light supervision. Tried it neg. before I knew better and blew the dome light fuse. Changed the relay wiring to:

85-BLACK/ white from Python,

86-12volt,

87-same 12volt,

30- BLACK/ lt blue dome light wire.

It worked a couple of times then stopped. Fuse okay. Dome light comes on when door opens just not with remote.

Do I have the relay wrong? Something else?

Thanks,

Scott

SoundImage

Copper - Posts: 75

Joined: June 18, 2003

Location: United States

Posted: February 11, 2009 at 10:50 PM / IP Logged

try applying ground to post 85 on the relay and see if the light turns on or if the relay clicks if it does then theres a problem with the output or bad connection. if it doesn't then theres a power issue with the relay or bad relay. that should help you get the problem resolved.

ssailer

Member - Posts: 5

Joined: February 02, 2009

Posted: February 12, 2009 at 3:40 PM / IP Logged

thanks for the suggestion, I'm going to try that now. Is it okay to use the same 12 volt source for poles 86 and 87?

Scott

loneranger

Copper - Posts: 572

Joined: December 28, 2008

Posted: February 12, 2009 at 7:06 PM / IP Logged

ssailer wrote:

thanks for the suggestion, I'm going to try that now. Is it okay to use the same 12 volt source for poles 86 and 87?

Scott

Yes and fused I hope.

Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.

Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?

Moral - Never dismiss the obvious.

ssailer

Member - Posts: 5

Joined: February 02, 2009

Posted: February 12, 2009 at 8:19 PM / IP Logged

Yeah, they're fused. Thanks for the help. I tried the ground on the relay and the light came on. Checked my connections (all soldered and taped), all good. I disconnected negative battery cable, unplugged harness from RS brain and... dome light works fine. Just needed to reset the brain I guess.

Scott

jla74

Member - Posts: 21

Joined: February 09, 2009

Location: Minnesota, United States

Posted: February 13, 2009 at 1:06 PM / IP Logged

I noticed you were installing the same python as I am, on a different vehicle then I am but I was hoping you could answer some of the questions I had. Can you check this post and see. I would appreciate any help. Thanks.

https://www.the12volt.com/installbay/forum_posts.asp~TID~111516~PN~1

ssailer

Member - Posts: 5

Joined: February 02, 2009

Posted: February 13, 2009 at 2:31 PM / IP Logged

checked your post...

1. Didn't use the blue wire

2. Didn't use the WHITE/ blue wire

3. the 1400xp DOES have anti-grind. I would definitely use this.

4. sorry, I don't have a factory alarm so I can't help you there.

Hope this helps.

Scott

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

99 expedition, python 1400xp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.