03 nissan altima rs/keyless issues

Home / the12volt's Install Bay / Car Security and Convenience / 03 nissan altima rs/keyless issues (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

burn350219999

Member - Posts: 6

Joined: February 25, 2009

Posted: February 25, 2009 at 3:43 PM / IP Logged

Having some issues with the door locks and the remote start

I have an Audiovox Prestige 996 with the red and green lock/unlock wires that switch between +12 and ground that can be hooked up to +12 volt or ground triggered vehicles depending upon the application. There is no factory alarm on the car and I've got the lock/unlock wires hooked up to the brown and pink wires in the car. The vehicle will lock but won't unlock. Using a wire hooked up to a ground I can tap the pink and brown wires and get the vehicle to lock and unlock. I've also treid using the pink/blue and WHITE/ blue wires and I've tried setting the unlock signal to a dbl pulse with the same results. Any thoughts on what I need to do to get the unlock to work?

Secondly the Remote start, I'm using a 555U bypass module. When I remote start the car starts and runs for only a few seconds and then shuts off. I tried putting a key in the ignition in the off position and then remote starting and the same thing happens. Any thoughts on this issue?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 25, 2009 at 3:57 PM / IP Logged

It might be worth trying a relay to boost the ground signal from the Audiovox signal, or diode the outputs, bands toward the prestige, second point, sounds like one of two things, you haven't energised enough wires at the ignition, or tach not learned.

burn350219999

Member - Posts: 6

Joined: February 25, 2009

Posted: February 25, 2009 at 5:37 PM / IP Logged

Ok, I got the RS working. The issue was the tach was not learned. I had the RS unit in another vehicle prior to this one so it was getting the wrong signal.

As for the unlock problem I tried the relay and also the diodes with no success. Got any other ideas?

chadwa2003

Copper - Posts: 353

Joined: January 08, 2005

Location: Canada

Posted: February 25, 2009 at 5:43 PM / IP Logged

Have you tested the output on the audiovox it sounds like you have no output on the unlock trigger

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

03 nissan altima rs/keyless issues

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.