tilt sensor wiring to alarm system

Home / the12volt's Install Bay / Car Security and Convenience / tilt sensor wiring to alarm system (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

simoniz

Member - Posts: 1

Joined: February 16, 2009

Posted: March 02, 2009 at 3:01 PM / IP Logged

Hey,

I have to connect a DEI 507M tilt sensor to an Autostart 2way alarm. The wire names are not matching with the ones on my alarm. So since I'm not a pro and don't want to make mistakes, I'm just asking you guys if you can tell me which wire connects togheter. I leave you the 2 diagrams to make life easier! Thanks

https://img127.imageshack.us/img127/4082/sanstitre.png

https://img212.imageshack.us/img212/1797/sanstitre2b.png

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: March 03, 2009 at 4:39 PM / IP Logged

Wire it in series with the shock sensor, if three wire, join green and blue together, diodes in green and blue, bands towards sensor. I would strongly advise not using it, they false constantly.

Back to Top

jennifer8055

Member - Posts: 1

Joined: March 04, 2009

Location: New York, United States

Posted: March 04, 2009 at 1:36 AM / IP Logged

If you're looking for a home security system you should check out www.usalarmcompanies.info . They give you a free comparison of the various home alarm system providers in the US and you can choose one based on the size of your home, your requirements, budget etc.

Back to Top

loneranger

Copper - Posts: 572

Joined: December 28, 2008

Posted: March 04, 2009 at 2:08 AM / IP Logged

Mods need to delete the above post and delete the account. It has nothing to do with 12volt and is advertising.

Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.

Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?

Moral - Never dismiss the obvious.

Back to Top

icarus_icarus

Copper - Posts: 229

Joined: November 01, 2005

Location: Ontario, Canada

Posted: March 04, 2009 at 4:01 AM / IP Logged

Howie, I've got a 507M on my car and never had it false yet. I cut both the white and black loops so it is less sensitive though, and doesn't arm as quick. I jacked up the car while armed and it goes off just before the tires leave the ground no matter where I jack it up from... I'll have to reconnect the black and see if that makes it false at all some time to check it out...

Is there a better unit or suggestion to use to protect my rims from being stolen?

·Ï¢årµ§·

tilt sensor wiring to alarm system - Last Post -- posted image.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

tilt sensor wiring to alarm system

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.