eq to stock head unit?

How can i wire in my freinds eq into his car.He has a stock deck in there and i need advice on how to get the eq wired up to the stock harness or possibly a hi low converter does anybody no how to go about doing this..4 12s cvr sealed

2 hifonics bxi608d

1 kinetic hc 800

alpine reciever

infinity kappa door speakers

What kind of EQ? What kind of stock system?  It might or might not be possible.Support the12volt.com

Its a 98 ford explorer and he has a stock radio in there now he wants me to put in his system for him.He has a clarion eq and wants me to use it for his rca outputs but what is confusing me is how do i wire the eq into the stock harness.Or could i get him a high low converter with the rca out puts already on there and wire the eq into that??4 12s cvr sealed

2 hifonics bxi608d

1 kinetic hc 800

alpine reciever

infinity kappa door speakers

it sounds as if it would work to me but kinda pointless considering the hi los cut out a good amount of sound qaulity. i personally hat usin hi los strongly reccomend aftermarket h/u

6thaveme wrote: Its a 98 ford explorer and he has a stock radio in there now he wants me to put in his system for him.He has a clarion eq and wants me to use it for his rca outputs but what is confusing me is how do i wire the eq into the stock harness.Or could i get him a high low converter with the rca out puts already on there and wire the eq into that??

Yep, that would be the only way to do it.

Support the12volt.com

Im haveing trouble figuring out witch wire on the hi low converter will splice into the stock harness.The only wire i see on the stock harness that is color coded to the hi low converter is the constant witch is yellow.Other than that hi low converter has a black and blue wire for chasis ground?whitch wire does this splice into..also there is a blu wire for remote turn on i am also confused where to splice this wire into....4 12s cvr sealed

2 hifonics bxi608d

1 kinetic hc 800

alpine reciever

infinity kappa door speakers

I would use one each Metra 70-1770 and 1771 wiring harness adapters and not splice into the factory wiring at all.Support the12volt.com

70-1771 and 71-1771    Each harness has the same color wires, simply connect the harnesses together wire color to wire color, and connect the LOC along with the front or rear speaker wires.

and the original harness wont be in use anymore4 12s cvr sealed

2 hifonics bxi608d

1 kinetic hc 800

alpine reciever

infinity kappa door speakers