stereo parts i bought, parts i need

Home / the12volt's Install Bay / Car Audio / stereo parts i bought, parts i need (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

helli3yte

Member - Posts: 8

Joined: March 19, 2009

Location: Illinois, United States

Posted: March 19, 2009 at 11:30 PM / IP Logged

Hello,

This is my first time posting on this forum so i thought it would be a great idea to get the answers from the masters. Well here goes.

I have bought RE AUDIO - XXX 6X5 components /with tweeter for the front - 300 WATTS RMS TOTAL or 150 RMS per Piece - (2OHM)

I have bought RE AUDIO - 5X7 2WAY FR for the back - 250 RMS TOTAL or 125 RMS per piece - (4OHM)

I have bought RE AUDIO - SE 10" DVC - 1200 WATTS RMS or 600 WATTS RMS per piece - (2OHM)

I would like to get one amp to power everything to as close to the maximum RMS speakers/subs as i can get.

Please help. I would like to get this professionaly installed. Any help would be greatly appreciated.

THANK YOU

helli3yte

Member - Posts: 8

Joined: March 19, 2009

Location: Illinois, United States

Posted: March 19, 2009 at 11:30 PM / IP Logged

p.s. 2003 PT CRUISER TE

memfus_boi

Copper - Posts: 148

Joined: June 05, 2005

Location: Tennessee, United States

Posted: March 20, 2009 at 12:34 AM / IP Logged

well good luck finding an amp that can push atleast 1200rms you more then likely will have to have 2 seperate amps

If I'm to loud, then you're too old!!!

helli3yte

Member - Posts: 8

Joined: March 19, 2009

Location: Illinois, United States

Posted: March 20, 2009 at 6:35 AM / IP Logged

well how about making the subs go 300watts rms a piece. then what options do i have

ragsports

Copper - Posts: 192

This member has made a donation to the12volt.com. Click here for more info.

Joined: March 17, 2008

Location: Michigan, United States

Posted: March 20, 2009 at 8:30 AM / IP Logged

the closest you are going to get assuming your subwoofers are dual 2 ohm coils are this amplifier Zapco DC650.6

j.reed

Copper - Posts: 716

Joined: January 05, 2009

Location: Arkansas, United States

Posted: March 20, 2009 at 8:41 AM / IP Logged

Your looking at a 2 amp system to even get close to full power. BTW are the subs dual 2ohm or 4ohm you just simple put 2 ohm so is that per coil or did you figure wiring them paralel?

stereo parts i bought, parts i need -- posted image.

helli3yte

Member - Posts: 8

Joined: March 19, 2009

Location: Illinois, United States

Posted: March 20, 2009 at 2:45 PM / IP Logged

j.reed wrote:

Your looking at a 2 amp system to even get close to full power. BTW are the subs dual 2ohm or 4ohm you just simple put 2 ohm so is that per coil or did you figure wiring them paralel?

the subs are 2ohm dual voice coils

helli3yte

Member - Posts: 8

Joined: March 19, 2009

Location: Illinois, United States

Posted: March 20, 2009 at 2:59 PM / IP Logged

ragsports wrote:

the closest you are going to get assuming your subwoofers are dual 2 ohm coils are this amplifier Zapco DC650.6

thats too expensive. unless someone is selling at a great price. how about another make and model of amp just below that. less expensive.

boogeyman

Silver - Posts: 359

Joined: October 18, 2007

Location: Tennessee, United States

Posted: March 20, 2009 at 6:37 PM / IP Logged

If the subs were dual 4's the memphis belle would be a good candidate...............but I would go with two amps maybe look int the xt series from RE the 1600.4 and the 4000d I think the model numbers are correct

helli3yte

Member - Posts: 8

Joined: March 19, 2009

Location: Illinois, United States

Posted: March 20, 2009 at 7:20 PM / IP Logged

but why do i need 2 amps?. i want only one. where am i gonna fit 2 amps?

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.