Wire info

Home / the12volt's Install Bay / Car Security and Convenience / Wire info (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dkeenan

Copper - Posts: 52

Joined: May 20, 2002

Location: Ireland

Posted: March 24, 2003 at 5:53 AM / IP Logged

Can anyone tell me the correct wire to use for the indicator's. I can see the

PARKINGLIGHTS + |green |driver kickpanel

I cannot seem to source the indicator wire and toyota have put the fuse box up under the airbag on the passenger side over here. It would be so difficult to change a fuse never mind source a wire in the fuse box.

Cheers

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 24, 2003 at 3:04 PM / IP Logged

What are you trying to do ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

dkeenan

Copper - Posts: 52

Joined: May 20, 2002

Location: Ireland

Posted: March 25, 2003 at 7:43 AM / IP Logged

Thanks Jeff,

I'm just trying to hook up the indicators so they flash when I arm the alarm.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 25, 2003 at 7:46 AM / IP Logged

what is the make and model of car

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

dkeenan

Copper - Posts: 52

Joined: May 20, 2002

Location: Ireland

Posted: March 25, 2003 at 7:55 AM / IP Logged

Sorry,

Its a 2003 Toyota Corolla Saloon (sedan)

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 25, 2003 at 8:32 AM / IP Logged

this for 2002-2003 corolla im not sure about the saloon. have never heard of that one.

just double check the wires before you hook anything up.

Constant 12 volts WHITE IGNITION SWITCH HARNESS

Ignition 12 volts BLACK/ WHITE IGNITION SWITCH HARNESS

Starter RED IGNITION SWITCH HARNESS *

Dome Light RED / WHITE (-) IGNITION SWITCH HARNESS **

Trunk Pin Switch RED / WHITE (-) AT LIGHT IN TRUNK

Parking Lamp GREEN (+) CONNECTOR ON BACK OF FUSE BLOCK ***

Power Lock BLUE/WHITE 10 PIN CONNECTOR ****

Power Unlock BLUE / YELLOW IN DRIVER KICK PANEL #209

* Remove Positive Battery Terminal If Cutting To Prevent Check Engine Light. ** RED / WHITE (-) Key cylinder switch light. If This Only Gets Dr. Door Alt Location Is At The Back Side Of Drivers Side Fuse Junction Block. ***12 Pin Connector **** Child Safety Lock - WHITE (-) In 10 Pin In Driver Kick Panel. #209 - See Child Safety Door Lock Diagram.

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

dkeenan

Copper - Posts: 52

Joined: May 20, 2002

Location: Ireland

Posted: March 25, 2003 at 10:29 AM / IP Logged

Cheers david.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Wire info

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.