the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 5901 starter kill , remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
dcorwin822 
Member - Posts: 34
Member spacespace
Joined: November 09, 2008
Location: New York, United States
Posted: May 29, 2009 at 12:46 PM / IP Logged  
Make sure you have your tach wire hooked up correctly. Make sure the 5901 is programed to use the tach wire not the silly simulated tach. Start the car and than hold down the valet switch (with in a few seconds) untill the light comes on solid.
kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: June 01, 2009 at 2:22 PM / IP Logged  
it will not work in Manual transmission mode if tach is not learned.......
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
namyenruoj 
Copper - Posts: 64
Copper spacespace
Joined: May 27, 2009
Location: British Columbia, Canada
Posted: June 02, 2009 at 3:23 PM / IP Logged  
i did the tachless today according to the programming and when i started the car it did not go and i get the 7 flash and error on the remote again. which wire anyway that will start the car maybe i can find out by metering it out.
namyenruoj 
Copper - Posts: 64
Copper spacespace
Joined: May 27, 2009
Location: British Columbia, Canada
Posted: June 03, 2009 at 1:34 PM / IP Logged  
I tried the car first thing today as I mentioned. Finally it worked now. thanks again for all your help specially you and Mr. LEE
Like I mentioned before I did the manual shutdown according to the instruction, I am very happy because while the car is running I press this remote start button and from my remote it says remote start on and when I turned the ignition OFF the car still running, I exit the door and arm the car. then the car shut off. I can be able to do this before my big problem was I didn't know that I have to wait for a little while before you can be able to remote start the car i guess the unit has to prepare or resets itself first.
Now I have another issue which I noticed. the unit tries to start the car at least few times and it did not. so I tried it again, the unit tries again but when i depress my clutch pedal the car finally "STARTED". Is there a way of bypassing this clutch pedal because I can not remotely start the car outside unless I'm inside and pressing the clutch pedal
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer