cant get my amp to work

Home / the12volt's Install Bay / Car Audio / cant get my amp to work (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

rub8322

Member - Posts: 18

Joined: May 27, 2009

Location: Florida, United States

Posted: June 02, 2009 at 9:36 PM / IP Logged

i am an idiot wrote:

Does your radio or amplifier have a built in crossover? On the amp it will be a switch with these settings. LPF/FULL/HPF

i think it does, the amp has three or four small knobs and those letter are very familiar, i think i saw them on the amp.

i am an idiot

Platinum - Posts: 13,674

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: June 02, 2009 at 11:08 PM / IP Logged

LPF = Low Pass Filter, it only allows low frequencies to pass through the amp.

HPF = High Pass Filter, it only allows higher frequencies to pass

FULL = Full Range, it allows all frequencies to pass.

rub8322

Member - Posts: 18

Joined: May 27, 2009

Location: Florida, United States

Posted: June 03, 2009 at 2:53 AM / IP Logged

i am an idiot wrote:

LPF = Low Pass Filter, it only allows low frequencies to pass through the amp.

HPF = High Pass Filter, it only allows higher frequencies to pass

FULL = Full Range, it allows all frequencies to pass.

so which one should i turn off to get rid of the voices? is there a specific setting i should have to get the best quality bass.

i am an idiot

Platinum - Posts: 13,674

Joined: September 21, 2006

Location: Louisiana, United States

Posted: June 03, 2009 at 5:39 AM / IP Logged

Some amps are different, you may have to try it in each position and see what works best for your amplifier. There may be a knob very near that switch also. It may be labeled Crossover Frequency, after you figure out which switch position works best for you, you may want to give that knob a twist and see what it does.

rub8322

Member - Posts: 18

Joined: May 27, 2009

Location: Florida, United States

Posted: June 03, 2009 at 3:28 PM / IP Logged

ok, i will post more info on what happened. thanks

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

cant get my amp to work

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.