the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

old soundstream vs crunch


Post ReplyPost New Topic
< Prev Topic Next Topic >
whipped500 
Member - Posts: 9
Member spacespace
Joined: June 11, 2009
Location: Illinois, United States
Posted: June 11, 2009 at 1:59 PM / IP Logged  
Hi, I'm putting a system in my boat and I am going to be using 4 10inch Kenwood KFC-w254MW. They are a single 4 ohm vc rated at 50-200 watts RMS and 700 watts peak. My question is that I already have an oldschool Soundstream Rubicon 702 that I can use or should I look at something bigger? I don't want to spend any money if I have to but if I do I want to keep it under $150, that is why I would look at Crunch. Please help, I know nothing about electronics but keep in mind that this is in a boat, just like a convertible, the sound is not going to be perfect because of the open environment. Thanks in advance.
DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: June 11, 2009 at 2:59 PM / IP Logged  
Use the Rubicon, don't look at Crunch.
Support the12volt.com
whipped500 
Member - Posts: 9
Member spacespace
Joined: June 11, 2009
Location: Illinois, United States
Posted: June 11, 2009 at 3:12 PM / IP Logged  
Will the soundstream amp have the power to run all 4 subs? I was told to over power speakers and turn down the amps rather than under power a speaker.
DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: June 11, 2009 at 5:41 PM / IP Logged  
Set the amp gain properly and wire the subs properly it will work just fine.
Support the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 22, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer