the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

box for most spl


Post ReplyPost New Topic
< Prev Topic Next Topic >
Blowntweeters 
Silver - Posts: 650
Silver spacespace
Joined: June 03, 2005
Location: Nevada, United States
Posted: July 26, 2009 at 9:25 PM / IP Logged  
heres the deal . went to a comp today took 2nd in my class stock 0 to 600 .i hit 138.5 on a termlab..broke out andd hit 138.8. but what 1st place hit. 147.1 . with less power and less cone surface. my box is the problem dual 15" sealed and small . 1990 toyota celica. trunk i can fit 36"x16"x16" i have for the set up is 2 rf p1's punch 6002  . so if any one can help me out on what to build with the given space.
1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: July 26, 2009 at 9:35 PM / IP Logged  
Contact Jeff Chilcott
upzaw2000 
Member - Posts: 43
Member spacespace
Joined: January 04, 2007
Location: United States
Posted: July 27, 2009 at 11:30 AM / IP Logged  

my guess for a celica....

small box.... subs up... 2 4" aero ports facing rear... and u havent mentioned your amp yet i dont think....

my the box as small as possible... a "CRX" box.

you will have to play with it from there.... i have never personally played with a celica.

Blowntweeters 
Silver - Posts: 650
Silver spacespace
Joined: June 03, 2005
Location: Nevada, United States
Posted: July 27, 2009 at 7:24 PM / IP Logged  
single 8 ohm subs amp RFpunch 6002 tested  power  4 ohms bridged 756 watts RMS . rated 600 RMS i wanna be able  to run stock o to 600 and the lowest trunk class i am already planning on cuting some sheetmetal for more clerance for the box. i will find out what i have for box size. by next week.after i get cutting.  and thanx for the help
1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700
jeffchilcott 
Platinum - Posts: 2,483
Platinum spacespace
Joined: April 11, 2002
Location: United States
Posted: July 28, 2009 at 9:40 AM / IP Logged  
something to try.    Box with sub up port up with it all the way at the back of the trunk.    On low power you will actually be better with a larger box.   Try something around 4 cuft firing the way I described.     If you send me the exact sub model numbers I might be able to plot something up.
I am currently running trunk 0-1000 and plan to move to trunk 1001+ soon.   I am getting ready for our regional event where I will only be running one of my amps so I can run both trunk 0-1000 and 0-600 stock.   I will say this though.   I will be louder then my WR in trunk 0-1000 which is a 154.0   box for most spl -- posted image.
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer