3rd crossover for components...

Home / the12volt's Install Bay / Car Audio / 3rd crossover for components... (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

paultman

Member - Posts: 19

Joined: March 16, 2003

Location: United States

Posted: March 28, 2003 at 8:29 AM / IP Logged

Hey I've ordered some Infinity Referance 6.5's and I've read they are good for hi's and midrange but not very good for low base. They come with crossovers at 3500hz for the tweet and woofer. The freq response is suppose to be like 72-21k.

I was wondering of u guys think I should run a passive crossover to the woofer at like say 100hz. I do that now with some kenwood 2 ways that I have in the rear (fill) at 180hz and they sound lots better (they say the range is something like 43-20k but at low freq they distort quickly).

BTW I've got a Rockford HX2 using 854wats from a Rockford 400s in a sealed box so my lows are pretty much covered.

Thanks for the advise,

Paul

esmith69

Gold - Posts: 1,511

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 26, 2002

Location: United States

Posted: March 28, 2003 at 9:14 AM / IP Logged

What are the specs on the HX2? Do you have a low-pass crossover running on that one right now?

paultman

Member - Posts: 19

Joined: March 16, 2003

Location: United States

Posted: March 28, 2003 at 10:06 AM / IP Logged

the HX2 is 30-200hz I'm running a 200hz crossover from the amp, it's also dual coil

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

3rd crossover for components...

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.