port placement

Home / the12volt's Install Bay / Car Audio / port placement (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

eric21

Copper - Posts: 49

Joined: May 20, 2009

Posted: August 17, 2009 at 7:41 AM / IP Logged

I notice when most people build their boxes with slot ports they run the port the length of the side of the box that the port is on.

Would there be any problem putting a rectangular slot port in the middle of the box and not spanning the entire length of the box. I'm asking this quest because if I was to do wall to wall port it would be 48x2" (way over a 8 to 1 ratio) and I would think its better to do say a 16x6" in the middle. Would this work ok??

Back to Top

soundnsecurity

Gold - Posts: 2,711

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 10, 2008

Location: Louisiana, United States

Posted: August 17, 2009 at 8:08 AM / IP Logged

yeah it's ok to do that

Back to Top

Search for other posts by soundnsecurity

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

port placement

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.