the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

93 deville radio options with bose


Post ReplyPost New Topic
< Prev Topic Next Topic >
still_walkin 
Silver - Posts: 644
Silver spacespace
Joined: April 18, 2007
Location: California, United States
Posted: August 23, 2009 at 2:18 AM / IP Logged  
I found a 93 deville 87k and I'm like nice. I'm doing A a radio swap the car has the anti theft and I know some caddies radios are wired to the security and I'm going to loose my chimes and bells. I know I have to remove the radio and relocate it in the trunk any special harness and I was told if I cut the wires I can screw it up . Chances is when I put the new radio in I'm not going to use the factory harness soif the radio is plugged to the alarm will unplugging the speakers affect it help
1993 sdv
Alpine 4x6 6x9 5 1/4 swr-10d4
alpine v60
12.5 VGA flip down
Nettop pc w/10" touch screen
78nova
5-re audio 5x7 ,10" sub &
Xtx-500.5
"Take the faceplate off get the jumperpack"
ajstetler 
Copper - Posts: 94
Copper spacespace
Joined: October 31, 2008
Location: Illinois, United States
Posted: August 23, 2009 at 10:41 PM / IP Logged  
Not sure you were informed correctly. For this model year, there should be no chimes to deal with, but you may have to run wiring to the tuner/amp in the trunk on the passenger side. I don't believe a radio relocation is needed. Take a picture of the radio and post it so I can help you out. If my memory serves correctly, there is not much to these vehicles. Cadillac didn't start the Class II data connection at the radio until 1996. Let us know...
Big Al
still_walkin 
Silver - Posts: 644
Silver spacespace
Joined: April 18, 2007
Location: California, United States
Posted: August 23, 2009 at 10:50 PM / IP Logged  
Ok thanks for the info . As for the amp wires and speaker wire the battery is on the passengers side so I was going to run the amp wire there and my signal wires on the opposite side. As for the wiring of the radio I did it in my 86 but it had no bose but I rewired all the speakers I didn't use factory wiring.
1993 sdv
Alpine 4x6 6x9 5 1/4 swr-10d4
alpine v60
12.5 VGA flip down
Nettop pc w/10" touch screen
78nova
5-re audio 5x7 ,10" sub &
Xtx-500.5
"Take the faceplate off get the jumperpack"

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, January 27, 2023 • Copyright © 1999-2023 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer