Help!! Wires don't match

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / Help!! Wires don't match (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

GoZpascal

Member - Posts: 12

Joined: March 24, 2003

Location: United States

Posted: March 28, 2003 at 7:08 PM / IP Logged

Have the alarm wiring from this site but the wires don't match.

92 Jeep Cherokee

Ignition harness has 2 Red 1 each of Orange, Blue, Purple and two smaller grey/white and purple / YELLOW. I'm installing a 2015FM2 in this. Any help out there?

-mike

GoZpascal

Member - Posts: 12

Joined: March 24, 2003

Location: United States

Posted: March 29, 2003 at 11:01 AM / IP Logged

Figured it out. Turns out my wiring matches the 93 model on bulldog's website. Tested everything and all is ok. This brings a question.. are the wirings here user supplied?

-mike

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 29, 2003 at 11:24 AM / IP Logged

The wiring diagram that are given on this site are for reference only. It is the responsibility of the installer to check and verify all connections during installation. As far as the wiring diagrams and their source, most of the information is from either DEI or the Bulldog site, but there are many more out on the internet.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

GoZpascal

Member - Posts: 12

Joined: March 24, 2003

Location: United States

Posted: March 29, 2003 at 11:37 AM / IP Logged

Yea I understand teh for reference only part, and I did test them once I had teh infor from bulldog. It's just a little rettling when you get under the dash and nothing matches and you're not sure where to start.

This site in itself though is one of the best I've found on the subject and the information and experience here is invaluable..

-mike

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Help!! Wires don't match

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.