the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

cant get exclusive alarm to activate lock


Post ReplyPost New Topic
< Prev Topic Next Topic >
losingit 
Member - Posts: 15
Member spacespace
Joined: March 29, 2003
Location: United States
Posted: March 29, 2003 at 10:30 AM / IP Logged  
i just installed after market door locks to my 96 cherokee but the exclusive alarm ex-8000 i believe isnt working the locks. everything on the locks is hooked up right the alarm just doesnt send out the lock/unlock ground i think it might be in the programming but i dont know how do this
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: March 29, 2003 at 10:37 AM / IP Logged  
How did you wire the relays for the locks? Look here at the 4th diagram:
Adding Actuators
J Rilla
Owner/Installer
losingit 
Member - Posts: 15
Member spacespace
Joined: March 29, 2003
Location: United States
Posted: March 29, 2003 at 10:42 AM / IP Logged  
the relays are hooked up right the alarm was already in the truck before i put in the power locks and if i ground it where the alarm should it works
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: March 29, 2003 at 11:08 AM / IP Logged  
If you ground What, then it works? The outputs are typically 500ma or less, so you will need relays to make them work.
Or Put a test light or DMM on the outputs from the alarm and see what the polarity of the outputs are.
J Rilla
Owner/Installer
losingit 
Member - Posts: 15
Member spacespace
Joined: March 29, 2003
Location: United States
Posted: March 29, 2003 at 11:15 AM / IP Logged  
if i touch a ground to where the alarm hooks up to the relays. i thuoght the alarm output a negative polarity to activate relay
losingit 
Member - Posts: 15
Member spacespace
Joined: March 29, 2003
Location: United States
Posted: March 29, 2003 at 11:22 AM / IP Logged  
there is no output from alarm positive or negative
djfearny2 
Silver - Posts: 810
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: September 23, 2002
Location: United States
Posted: March 29, 2003 at 12:44 PM / IP Logged  
invest in something worth installing.
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: March 30, 2003 at 9:00 AM / IP Logged  
I am not familiar with that alarm. What does the manual say about the door lock outputs?
J Rilla
Owner/Installer
losingit 
Member - Posts: 15
Member spacespace
Joined: March 29, 2003
Location: United States
Posted: March 30, 2003 at 11:19 AM / IP Logged  

lots of help djfearny2 your an idiot

thanks j rilla i got it figured out when the guy installed my alarm i didnt have power locks so he didnt leave the harness for the lock system that hooks to the alarm i went to the local shop and picked one up


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer