06 escalade video out off factory rse?

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / 06 escalade video out off factory rse? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

hydrodancer91

Copper - Posts: 72

Joined: November 26, 2004

Location: United States

Posted: September 02, 2009 at 6:25 PM / IP Logged

anyone know the pin and color for video out off of a escalade with the factory flip down panasonic unit? this truck has the flip down with dvd and another panasonic flipdown for the third row seats. im trying to add headrest monitors to the system. and also when soldering the rca i know i solder the signal or center wire of the rca to the video out wire do you just ground the shield wiring? thanks in advance

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: September 03, 2009 at 6:02 AM / IP Logged

You would solder the shield to the video out ground connection or directly to ground.

I do not know about your particular overhead, most OEM units do not have a composite video output. They use RGB in most cases. You may have to power a monitor up in the vehicle, strip an RCA cable, ground the shield and begin probing with the center conductor. If there is a composite video output, you should be able to find it.

Back to Top

hydrodancer91

Copper - Posts: 72

Joined: November 26, 2004

Location: United States

Posted: September 03, 2009 at 8:22 AM / IP Logged

how would i do it if its a rgb signal then? thanks

Back to Top

i am an idiot

Platinum - Posts: 13,667

Joined: September 21, 2006

Location: Louisiana, United States

Posted: September 03, 2009 at 7:08 PM / IP Logged

You really need to test your unit, it may have composite video.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

06 escalade video out off factory rse?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.