push button start

Hi again Just as an up date. I was unable to find a suitable location to install the push button. Anywhere that I wanted to put it the trim panel was too thick or there was something behind it. Finally I decided to change the approach and got a small heavy duty toggle switch, (spring loaded) I drilled one of the switch blanks below the heated rear screen and the hazard warning switches. Set the toggle switch into it a replaced the blank. It relocated firmly so no fear of it coming adrift and I've been using it successfully for the past 6 weeks or so. Turn on the ignition and press the switch and she cranks, when she fires up release the switch. Job done and it's a good un! Again many thanks for your input it was very helpful

If it aint broken, fix it 'til it is