the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2010 toyota transponder bypass


Post ReplyPost New Topic
< Prev Topic Next Topic >
enice 
Silver - Posts: 857
Silver spacespace
Joined: March 05, 2006
Location: New York, United States
Posted: September 15, 2009 at 2:50 PM / IP Logged  
Spoke to Idatalink and what Mark Mikenzo just mentioned is exactly what they said to me.  Although the tech support guy said that the "IMO and IMI" method might work and said that they might revert to that method for that solution in the near future.  Will try the XK05 today and give feedback and see if it works. 
beegbie 
Copper - Posts: 341
Copper spacespace
Joined: August 17, 2002
Location: United States
Posted: September 16, 2009 at 6:25 PM / IP Logged  
There are no 80 bit regular keys, only smartkeys . I would try the datalink module. I have done many 2010 camrys with the fltb1 w/ko v.2.0 firmware (audiovox version) and never had a problem.
racing_bidule 
Copper - Posts: 66
Copper spacespace
Joined: December 13, 2007
Location: Quebec, Canada
Posted: September 17, 2009 at 12:28 AM / IP Logged  
Mark Mizenko wrote:

You have an 80bit key.  You have to use the "U" for the time being.

80 bit only applies to the RFID keys. The regular keys are remaining the same from 09 to 10

They've been forced to implement 80 bits on the RFID because the 40 bit wasn't secure enough to be used by RF

The ADS-TBSL KO is much more price point competitive for these applications.

Regards!

If you fail on your first attempt, at least destroy all evidence you tried!
tatianablue 
Member - Posts: 8
Member spacespace
Joined: July 08, 2005
Posted: September 19, 2009 at 4:11 PM / IP Logged  
xk05 will work fine on the 2010 camry.
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: September 24, 2009 at 6:32 AM / IP Logged  
Yep, did another 2010 Camry yesterday using the Idatalink(flashlogics) piece. No problems at all....
Mike M2
Tech Manager
CS Dealer Services
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer