ungo remote starter

Home / the12volt's Install Bay / Car Security and Convenience / ungo remote starter (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

muaiad97

Copper - Posts: 207

Joined: April 08, 2003

Location: Canada

Posted: September 28, 2009 at 12:30 PM / IP Logged

hi guys

i installed this ungo remote starter RK20 in buick rendavuz 2003 its working fine every thing exept the trunk it has to be programed the remote AUX buttun to operate the trunk i read the manual how to do it but still dosnt activate the out - to channel 2

any help

thanx

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: October 01, 2009 at 1:21 AM / IP Logged

should be defaulted to operate channel 2. you've pressed the aux button on the remote for 1.5 seconds? if you are and it still doesn't work then use a meter and test the smaller RED / white channel 2 output from the brain and make sure it's outputting ground

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

ungo remote starter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.