the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

what box size for 12 sub?


Post ReplyPost New Topic
< Prev Topic Next Topic >
kaztheminotaur 
Member - Posts: 48
Member spacespace
Joined: September 29, 2009
Location: Pennsylvania, United States
Posted: September 29, 2009 at 8:26 AM / IP Logged  

Is there a list anywhere that gives ideal box volume for 12" and 10" subwoofers?

I have a 99 Silverado extended cab and I'd like to make a box to go under the rear seat on the driver's side.

Thanks, Tom

kaztheminotaur 
Member - Posts: 48
Member spacespace
Joined: September 29, 2009
Location: Pennsylvania, United States
Posted: September 29, 2009 at 8:52 AM / IP Logged  
Using the Wedge 2 volume calculator I have .939 cubic feet internal volume available.
blackcivichatch 
Copper - Posts: 229
Copper spacespace
Joined: January 27, 2009
Location: Missouri, United States
Posted: September 29, 2009 at 9:08 AM / IP Logged  
Exactly what subs are you using?
UNLABELED Custom Car Club President
kaztheminotaur 
Member - Posts: 48
Member spacespace
Joined: September 29, 2009
Location: Pennsylvania, United States
Posted: September 29, 2009 at 9:11 AM / IP Logged  

I haven't gotten that far yet.

Do different subs prefer different volumes?

blackcivichatch 
Copper - Posts: 229
Copper spacespace
Joined: January 27, 2009
Location: Missouri, United States
Posted: September 29, 2009 at 9:19 AM / IP Logged  
Oh yea. Rockford Fosgate makes a shallow mount sub and it looks like it wants 1.00 cubic feet in a sealed enclousure or 1.25 in a ported box. Kicker's shallow mount also wants 1.00 cu ft in a sealed but 1.75 in a ported.
UNLABELED Custom Car Club President
kaztheminotaur 
Member - Posts: 48
Member spacespace
Joined: September 29, 2009
Location: Pennsylvania, United States
Posted: September 29, 2009 at 9:41 AM / IP Logged  

So is it safe to assume that most 12" subs will want 1 cubic feet volume?

Since I am a little small can I make up the rest with poly fill in the box?

blackcivichatch 
Copper - Posts: 229
Copper spacespace
Joined: January 27, 2009
Location: Missouri, United States
Posted: September 29, 2009 at 9:49 AM / IP Logged  
Haha., Its never 'safe' to assume anything with car audio. Polly fill will add 10-15% of the volume. You should be ok.. Just look up all the specs for the sub BEFORE you buy it and make sure that it will be ok in a 1.00 cubic foot sealed box
UNLABELED Custom Car Club President
kaztheminotaur 
Member - Posts: 48
Member spacespace
Joined: September 29, 2009
Location: Pennsylvania, United States
Posted: September 29, 2009 at 10:33 AM / IP Logged  
I measured again and I can increase my depth 2 inches to 17.  If I figure poly fill adding 15% to the volume that brings it up tio 1.24 cubic feet.
blackcivichatch 
Copper - Posts: 229
Copper spacespace
Joined: January 27, 2009
Location: Missouri, United States
Posted: September 29, 2009 at 11:40 AM / IP Logged  
Dont forget that the sub isn't flush with the rest of the box.
UNLABELED Custom Car Club President
h3_assassin 
Member - Posts: 20
Member spacespace
Joined: September 04, 2009
Location: South Carolina, United States
Posted: September 29, 2009 at 11:43 AM / IP Logged  
kaztheminotaur wrote:

Is there a list anywhere that gives ideal box volume for 12" and 10" subwoofers?

I have a 99 Silverado extended cab and I'd like to make a box to go under the rear seat on the driver's side.

Thanks, Tom

Your best bet would be to remove all things under the seat (that don't belong there)
See how much room you have, measure it up and throw that in to a box volume calculator. this is the one i used for my boxthat will give you the length width depth and height and factor in material displacement.
Simplify that,
measure your space, go to that site plug in the numbers and see what you get, if your trying for 1.00 cubic feet and end up with anything under .8xx poly fill wont save you for sealed. I recommend making a box that will stick out slightly in front and behind the seat, ever so slightly so no one will be tempted to use it as a foot stand.
After you've measured everything up tweak it with that tool to find out how close you can get and measure it up again with those numbers to make certain it will fit in the space. "I made my box as close to 2.5Cubic feet as possible but didn't remeasure my trunk space and was about half an inch to high....."
Measure twice, hate yourself once.
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, April 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer