the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

make a sedan sound like a hatchback?


Post ReplyPost New Topic
< Prev Topic Next Topic >
oerllikon 
Member - Posts: 7
Member spacespace
Joined: October 07, 2009
Location: Wisconsin, United States
Posted: October 08, 2009 at 11:35 AM / IP Logged  
hey everyone. I just got a sedan after owning 2 hatchbacks. I realized immediately that the sound in a sedan sounds insanely muffled, and it kind of bothers me that im not getting the fullest out of my equipment. Is there anything i can do to help this, if not get it up to par?
Thanks
oerllikon 
Member - Posts: 7
Member spacespace
Joined: October 07, 2009
Location: Wisconsin, United States
Posted: October 08, 2009 at 11:36 AM / IP Logged  
I own a 1988 corsica CL, by the way
aznboi3644 
Gold - Posts: 2,600
Gold spaceThis member consistently provides reliable informationspace
Joined: May 01, 2006
Location: United States
Posted: October 08, 2009 at 2:28 PM / IP Logged  
take out the back seat...cut out the rear parcel shelf...basically the only way.
Something is there...take it out
Custom Enclosure Design
blackcivichatch 
Copper - Posts: 229
Copper spacespace
Joined: January 27, 2009
Location: Missouri, United States
Posted: October 08, 2009 at 2:49 PM / IP Logged  
Or, Maybe... You could use the rear deck as part of a Very custom sub enclosure.. And that would look pretty tight, Havin a couple twelves on the back deck
UNLABELED Custom Car Club President
oerllikon 
Member - Posts: 7
Member spacespace
Joined: October 07, 2009
Location: Wisconsin, United States
Posted: October 08, 2009 at 4:17 PM / IP Logged  
I wanted to build a box that sits in the trunk, and fires at the back window into the cabin. I just didnt really know where to start, and research since these things are hard to find. I would take my seat out, but there is metal between the trunk and back seat. Its not designed to be folded forward, etc. Does anybody know where i could start researching boxes like this?
oerllikon 
Member - Posts: 7
Member spacespace
Joined: October 07, 2009
Location: Wisconsin, United States
Posted: October 08, 2009 at 10:53 PM / IP Logged  
How would running flare ports to the rear deck work? Like cutting holes in the rear deck, then running the ports up to them? How would that sound?
d_rock_81 
Member - Posts: 39
Member spacespace
Joined: June 09, 2009
Location: North Dakota, United States
Posted: October 09, 2009 at 12:26 PM / IP Logged  
you could search junk-yards for a fold down back seat and modify it to fit your car. I did this with a 73 Duster.
Dustin Rockney
Rockstar Autosports
oerllikon 
Member - Posts: 7
Member spacespace
Joined: October 07, 2009
Location: Wisconsin, United States
Posted: October 11, 2009 at 5:24 PM / IP Logged  
hmm, did you have to cut out sheet metal? im guessing i could find a folding version of a corsica back seat

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, April 23, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer