need wire gauge size

Home / the12volt's Install Bay / Car Security and Convenience / need wire gauge size (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

i am an idiot

Platinum - Posts: 13,714

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: October 10, 2009 at 6:42 PM / IP Logged

i am an idiot wrote:

Have you tried placing the key in the switch and turn it to the run position, and try to remote start it. Will it start now?

Did you turn the key to the run position?

Back to Top

sublime44

Member - Posts: 25

Joined: October 09, 2009

Location: Ontario, Canada

Posted: October 10, 2009 at 7:52 PM / IP Logged

i am an idiot wrote:

Have you tried placing the key in the switch and turn it to the run position, and try to remote start it. Will it start now?

Did you turn the key to the run position?

yes i did.

Back to Top

i am an idiot

Platinum - Posts: 13,714

Joined: September 21, 2006

Location: Louisiana, United States

Posted: October 10, 2009 at 8:08 PM / IP Logged

I am not real sure if the passloc system looks for a signal between off and on, or between on and start. It may look for it between on and start, if that is how it works, just turning it on will not tell us anything. Maybe some of our hands on guys can let us know how it works.

Back to Top

KPierson

Platinum - Posts: 3,527

Joined: April 14, 2005

Location: Ohio, United States

Posted: October 11, 2009 at 7:40 AM / IP Logged

The passloc system I worked on yesterday sent the resistance after cranking the motor. (this was in a 2001 Grand Am).

What happens if the vehicle is running and you remote start it and remove the key?

Kevin Pierson

Back to Top

boxhead78

Copper - Posts: 84

Joined: October 07, 2009

Location: California, United States

Posted: October 12, 2009 at 10:04 PM / IP Logged

it won't work it only work if the key is in the off position

boxead78

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

need wire gauge size

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.