clifford intelliguard 7000

Home / the12volt's Install Bay / Car Security and Convenience / clifford intelliguard 7000 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rhillaker

Member - Posts: 1

Joined: October 17, 2009

Location: California, United States

Posted: October 17, 2009 at 1:05 PM / IP Logged

What and where is the main fuse to diasble the Clifford Intelli Guard 7000 alarm? Could use your help.

R.P. Hillaker

Back to Top

scirocco16v

Copper - Posts: 112

Joined: October 27, 2003

Posted: October 17, 2009 at 3:26 PM / IP Logged

if iit was done correctly it should be a 5 amp under the hood near the battery. Just in case you did not know without that fuse in the car will not start or crank. The immobilization circuits need to be put back together when pulling that fuse in order to drive the car

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clifford intelliguard 7000

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.