Topic Closed)
Members
Search
Register
Login
Posted: April 02, 2003 at 6:41 PM / IP Logged
Posted: April 02, 2003 at 7:26 PM / IP Logged
I don't know of any chart like that....but if you're looking to design a port, i'm going through my grad book from Mobile Dynamics in Toronto. (I gotta keep up to date too!!! 
) And i'll give you some of the things that we learned and they told me from my notes. (They're just small pointers when designing a ported box).
-In a vented box, the port length shouldn't be more that 4x it's diameter.
(DON'T USE AS A RULE BUT IN GENERAL......) >>>>
8" = 1-2" in diameter10" = 2-3" in diameter12" = 3-4" in diameter15" = 4-8" in diameter-I'm guessing that you wanted the chart to aviod formulas...but if you just hate math or anything like that I could help you out on them or do em for ya if you wanted. Just give me the specs that I need from the type of driver you are using. Hope that helped a bit....
Andrew Weitzel MECP First Class Installer
Posted: April 02, 2003 at 10:33 PM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Wednesday, May 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Wednesday, May 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
