100 amp draw, will this work?

Home / the12volt's Install Bay / General Discussion / 100 amp draw, will this work? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

eaglemanrus

Member - Posts: 4

Joined: November 27, 2009

Location: Arizona, United States

Posted: November 27, 2009 at 7:03 PM / IP Logged

I have a Mobile Linear amp that draws 100 amps on key-down. Im going to run it inside the house. I have a 935 amp deep cycle battery connected to a 52 amp power supply thats connected to the screws on the battery. The amp is connected to the post on the battery. When I key down, I will be pulling from the battery 100 amps for the short time period of key down. Will this system work for me with the 12 volt 52 amp power supply or will I need another method in keeping the battery charged up? Any advice will be appreciated... Dave

"Eagle View Ranch" in Arizona

i am an idiot

Platinum - Posts: 13,672

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: November 27, 2009 at 7:55 PM / IP Logged

It should be OK for short transmissions with breaks in between. But you will have to connect it and see how it holds up.

eaglemanrus

Member - Posts: 4

Joined: November 27, 2009

Location: Arizona, United States

Posted: November 27, 2009 at 8:30 PM / IP Logged

OK, THANKS! I just about have everything together now, planning on setting the system up this weekend, will let you know how it works..... Thank You! Dave

"Eagle View Ranch" in Arizona

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

100 amp draw, will this work?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.