2008 nissan rouge remote start problems

Home / the12volt's Install Bay / Car Security and Convenience / 2008 nissan rouge remote start problems (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

nitrob

Member - Posts: 16

Joined: April 22, 2008

Location: Germany

Posted: November 29, 2009 at 9:32 AM / IP Logged

I just put a Viper 5701 in a 2008 Nissan Rouge and can not get it to start. It will start with the key in the ignition and I could not hook up the pink w/white and pink w/black wires on the H3 plug. I used the XK07 PNK3 module with the install as well. I also could not find the factory alarm disarm and arm wires. Is this what is causing the problem? Can anyone tell me where the wires are. I tested every wire in the drivers kick panel and could not come up with anything. I have all the wiring diagrams from this forum for this vehicle. Maybe I did not test the wires correctly, I dont know. I am open to any and all advice.

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: November 29, 2009 at 10:16 AM / IP Logged

Sounds like you have a bypass problem, i have no personal experience with the vehicle in question but the factory alarm has nothing to do with the remote starting!

nitrob

Member - Posts: 16

Joined: April 22, 2008

Location: Germany

Posted: November 29, 2009 at 2:09 PM / IP Logged

So the bypass module should do it all correct? I should not have to hook up the alarm to the factory disarm wire. I need some help here folks.

metz35

Copper - Posts: 458

Joined: January 13, 2003

Location: Pennsylvania, United States

Posted: November 29, 2009 at 2:17 PM / IP Logged

Function List - XK07 - PKN3 4.02 (2008 Nissan Rogue)

W2W

PK-Immobilizer Bypass-Data No Key Req'd

D2D

PK-Immobilizer Bypass-Data No Key Req'd

looks like it does the key bypass only!!!! read manuals!!!

nitrob

Member - Posts: 16

Joined: April 22, 2008

Location: Germany

Posted: November 29, 2009 at 2:30 PM / IP Logged

I did read the manuals. This module is what is recommended by DEI for hooking it up in the Rouge at the time my friend purchased it.

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: November 29, 2009 at 5:32 PM / IP Logged

If you have a factory alarm, yes you must connect the FAD wire, but if you didn't, this would not prevent the vehicle from starting, the factory alarm would just sound wen the vehicle starts!

commit your way to jehovah and he will act in your behalf. psalms 37:5

hurleyloser

Copper - Posts: 157

Joined: February 05, 2005

Location: California, United States

Posted: November 30, 2009 at 2:49 AM / IP Logged

no need to connect FAD in this car, factory alarm will disarm with ignition. When you say it will start with the key in the ignition, are you saying with it just resting in the barrel, or with the key in the barrel AND turned to any position?

MECP Master Certified Technician

ASE A6 Certified Technician

nitrob

Member - Posts: 16

Joined: April 22, 2008

Location: Germany

Posted: November 30, 2009 at 6:37 AM / IP Logged

It will start with it just resting in the barrel. It does not make sense. Any ideas?

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: November 30, 2009 at 3:32 PM / IP Logged

Bypass problem! Ahhhhh, i'm invisible again! 2008 nissan rouge remote start problems -- posted image.

commit your way to jehovah and he will act in your behalf. psalms 37:5

nitrob

Member - Posts: 16

Joined: April 22, 2008

Location: Germany

Posted: November 30, 2009 at 8:32 PM / IP Logged

Then maybe it does not have the latest firmware uploaded to it or?

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.