Starter Disable

Home / the12volt's Install Bay / Car Security and Convenience / Starter Disable (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

justint

Member - Posts: 4

Joined: April 02, 2003

Location: United States

Posted: April 04, 2003 at 1:33 PM / IP Logged

I was reading about the passive starter kill on this site, and was trying to figure out the diagram ( https://www.the12volt.com/relays/page2.asp#psk). Can someone please explain to me the purpose of the relay on the right, and especially the top red wire connecting pin 85 of left relay to pins 85 and 87 of the right relay and the switch.

It seems to me that whenthe switch is pressed and contact is made, current will flow through the top red wire completely bypassing the relay on the right.

AE_installs

Dreadlock

Copper - Posts: 55

Joined: November 22, 2002

Location: United States

Posted: April 06, 2003 at 10:10 PM / IP Logged

as i see it: in order to flip the relay so the starter can engage you have to have the ignition powered, thus you need to put the key in then hold the switch and then crank it. thats is what i see

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Starter Disable

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.