remote start not working

Home / the12volt's Install Bay / Car Security and Convenience / remote start not working (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

negokay

Member - Posts: 19

Joined: December 25, 2009

Location: Maryland, United States

Posted: December 27, 2009 at 11:15 AM / IP Logged

I am trying to install a viper 5101 on a 2003 ford explorer with EXPRESSKIT PKALL DATA IMMOBILIZER. Whenever i try to remote start it i can hear it clicking, but dont start it.. I DONT KNOW WHERE I MADE THE MISTAKE.. PLEASE HELP....

I installed the followings

primary harness(h1) 12 pin

h1/1 CONNECT TO THE UNLOCK

h1/2 CONNECT TO YELLOW BATTERY

h1/3 CONNECT AT YELLOW/LTGREENN

h1/4 NOT CONNECTED

h1/5 GROUND @DRIVER KIK PANEL

h1/6 NOT CONNECTED

h1/7 NOT CONNECTED

h1/8NOT CONNECTED

h1/9NOT CONNECTED

h1/10 GROUNDED @ KIK PANEL

h1/11 HEADLIGHT BROWN

h1/12 NOT CONNECTED

(H2), 7 PIN CONNETOR

NONE CONNECTED

HEAVY GAUGE REMOTE START (H3) 8 PIN

H3/1 PINK TO RED / LT GREEN

H3/2 RED / WHITE +fused(30a) ignition 2 NOT CONNECTED

H3/3 ORANHE CONNECTED TO GREEN/ LT GREEN

H3/4 VIOLET:STARTER OUT CONNECTED TO RED

H3/5 RED CONNECTED TO YELLOW BATTERY

H3/6 N C

H3/7 N C

H3/8 CONNECTED TO YELLOW BATTERY

REMOTE START INPUT, 5-PIN

1- BLACK/ WHITE GROUND @ KIK PANEL

2- VIOLET/WHITE TACH @ COIL IN BLUE/LTGREEN

3- BROWN @ BRAKE PEDAL

4- HOOD PIN

5- N C

REMOTE START AUXILIARY OUTPUT, 5 PIN

THE ONLY ONE THATS CONNECTED IS THE BLUE STATUS OUTPUT AND ITS CONNECTED TO THE blue/white @ the pkall

ps: pkall is connected as d2d

PINK WIRE TO IGNITION RED / LTGREEN

BLACK N C

GREEN N C

TX TO WHITE/ LTGREEN

RX TO BROWN / LT ORANGE

yeyo

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: December 27, 2009 at 11:36 AM / IP Logged

Try inserting the key in the barrel and leave in the off position, remote start and see what happens!

commit your way to jehovah and he will act in your behalf. psalms 37:5

negokay

Member - Posts: 19

Joined: December 25, 2009

Location: Maryland, United States

Posted: December 27, 2009 at 1:49 PM / IP Logged

still not working ..

yeyo

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: December 27, 2009 at 1:57 PM / IP Logged

just a note, dont use the d2d, use it w2w method. make sure your powering up all ignitions and accessories. you might have tagged the wrong start wire, and the clicking is comming from the relays inside the rs.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

dasbogie

Silver - Posts: 514

Joined: September 30, 2006

Location: Pennsylvania, United States

Posted: December 27, 2009 at 2:09 PM / IP Logged

Did you switch it to auto transmission mode. Its the first feature in the last menu. What type of tach signal are you running, virtual tach, voltage, or regular tach?

negokay

Member - Posts: 19

Joined: December 25, 2009

Location: Maryland, United States

Posted: December 27, 2009 at 2:22 PM / IP Logged

dont know how to do the w2w method and yes the clickin is coming from the rs

yeyo

negokay

Member - Posts: 19

Joined: December 25, 2009

Location: Maryland, United States

Posted: December 27, 2009 at 2:33 PM / IP Logged

how do you put it for auto trans and i connected the tach to the coil line.. do know which that is...

yeyo

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: December 27, 2009 at 2:37 PM / IP Logged

you have to go into the programming menu and look for that feature. For some reason i have a feeling you dont have the start wire connected. The start wire is purple comming off the xcrs relay pack.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

negokay

Member - Posts: 19

Joined: December 25, 2009

Location: Maryland, United States

Posted: December 27, 2009 at 2:58 PM / IP Logged

it is connected its going to the RED wire in the ignision

yeyo

negokay

Member - Posts: 19

Joined: December 25, 2009

Location: Maryland, United States

Posted: December 27, 2009 at 4:19 PM / IP Logged

i've done the auto programin and its still not workin.. is there another wire biside the red wire in the ignition thats for the starter???

yeyo

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.